NLD FCC Android - Enterprise License

NLD FCC for USB cable remote controllers
Force FCC Mode on 2.4 / 5.8 GHz
Enable 4G SIM worldwide and disable Remote ID packet transmission if enabled

Make product review

SKU: NLDFCCAPKE

€35.00

Qty:

Features

NLD FCC for USB cable remote controllers

Force FCC Mode when blocked Enables FCC Mode even in regions where DJI normally restricts it
Force FCC bands Forces FCC transmission behavior on both 2.4 GHz and 5.8 GHz bands
4G SIM worldwide Enables worldwide 4G SIM support
Remote ID packet transmission disabled Disables Remote ID packet transmission if enabled
82 languages Fully translated into all 82 Android-supported languages
Free 3-hour test Test NLD FCC for 3 hours before buying a license

Compatibility

This license is for one drone only

NLD FCC is compatible with the supported drone models listed below. The license is tied to the drone model and is intended for standard phone/tablet based flight setups.

What can vary between drones, firmware versions and DJI flight app versions is the FCC activation method. Some setups can enable FCC Mode through the normal controller USB connection, while others require the direct USB-to-drone method.

If you are using a DJI remote controller with a built-in screen, such as DJI RC, DJI RC 2, DJI Smart Controller, RC Pro or RC Plus, you need the Smart RC license instead.

How FCC Mode is applied

NLD FCC can enable FCC Mode on the supported drone models below, but the best connection method can depend on the drone, controller, DJI flight app version and firmware version.

The important part is that DJI Fly and other DJI flight apps may reset the aircraft back to CE Mode when the GPS home point is updated. For this reason, the home point should be updated before FCC Mode is enabled with NLD FCC.

Standard controller USB method

On many DJI drones, FCC Mode can be enabled through the normal USB connection between your Android device and the remote controller.

First open your DJI flight app, connect to the drone and wait until the GPS home point has been updated.

Then close the flight app, open NLD FCC, tap Enable FCC Mode, and return to your DJI flight app from the launcher or by opening it manually.

Direct USB-to-drone method

Some drones, DJI Fly versions or firmware versions may reset back to CE Mode when the flight app reconnects to the aircraft.

In those cases, keep the DJI flight app connected to the drone on your normal flight device until the GPS home point has been updated.

Then use a second Android device connected directly to the drone by USB-C, open NLD FCC and tap Enable FCC Mode.

Important: when using the direct USB-to-drone method, your main flight device can still be Android or iOS. The second Android device is only used to enable FCC Mode directly on the drone while the DJI flight app remains connected.

Supported drones for this license

MATRICE 200

MATRICE 200 V2

MATRICE 300

MATRICE 600

MATRICE 600 PRO

MATRICE 30 SERIES

M30

M30T

MATRICE 3D

MATRICE 3D THERMAL

MATRICE 4E

MATRICE 4T

MAVIC 2 ENT

MAVIC 2 ENT ADV

MAVIC 2 ENT DUAL

MAVIC 3 ENTERPRISE

MAVIC 3 MULTISPECTRAL

MAVIC 3 THERMAL

INSPIRE 3

PHANTOM 4 RTK

Customers who bought this item also bought

Standard Activation key for NLD MOD Client

Works for the following drones:
MAVIC PRO/PLATINUM
MAVIC 2
PHANTOM 4
PHANTOM 4 ADVANCED
PHANTOM 4 PRO
PHANTOM 4 PRO+
PHANTOM 4 PRO v2
MAVIC AIR
SPARK
INSPIRE 2
DJI GOGGLES
MINI
MINI SE
MINI 2
PHANTOM 4 MULTISPECTRUM
FPV Racer
MAVIC AIR 2
MAVIC AIR 2S

€40.00

NLD FCC Android - Consumer License

NLD FCC for USB cable remote controllers
Force FCC Mode on 2.4 / 5.8 GHz
Enable 4G SIM worldwide and disable Remote ID packet transmission if enabled

€25.00