Ваша корзина пуста.
15 сентября 2019 г. 13:39:04

Remove NFZ

6 months ago
#706 Цитировать
Same issue here. Downgraded my Spark firmware to 01.00.0900.

I go to Remove NFZ and it seems to go OK.

I also installed the APK after patching version 4122.

When I launch the app and pair with the controller, it still won't let me take off and says I am in NFZ.

I also have the issue where Flight Controller settings in the PC Client has all boxes grayed out other than altitude.

I have tried a million different combinations and am very frustrated. Any help would be awesome.
0
5 months ago
#742 Цитировать
Spark...check in GO, on the about screen and see if the Precise Fly Safe Database should be 01.00.13.37
If so, the NLD NFZ removal patch has worked.  If not, run the patch again.

*remember that the drone won't do a full restart while running the patch.  Only the flight controller restarts, so if you leave your sound on in Windows, you will hear the drone disconnect and reconnect.

Also, one more tip.  NLD needs to download the patch from our servers, so if it is stalled - progress bar just sits there - check your internet connection and make sure NLD is allowed through any firewall and antivirus programs.

If you are in the Washington DC area and some areas in China, the NFZ info is hardcoded into the flight controller.  The NLD removal patch will not fix this.  You will need to be on early firmware,  01.00.0300, and DISABLE NFZ with the checkbox option.
0
5 months ago
#803 Цитировать
I can not install the NFZ.does not fill the bar.can someone help me?
I have the phantom 4 adv with crystalsky.thanks!!!!
0
4 months ago
#981 Цитировать
Hi guys, I'm trying to apply the NFZ remove patch with the lastest version of NLD client (1.9) but seems that the process is blocked..I waited 2 hours but nothing, still pending..I have a phantom 4 standard with 02.00.0700 firmware..please help me
0
4 months ago
#1274 Цитировать
Can someone help me, I'm from São Paulo / Br I have an M2 and I can not go to version 01.00.0100 by DJI assistant 2, someone with the same problem bought nld and was successful? I need to release the NFZ, the rest does not interest me much. Thank you
0
4 months ago
#1284 Цитировать
Just a heads up that this does not work for the Mavic Zoom.

After patching everything on the NLD client UI looks good and asks you to reboot the bird. After rebooting the controller's screen shows "IN NFZ".  

Also, Im using 4.1.22 of the GO APP downloaded from this website's guide section.
0
4 months ago
#1289 Цитировать
Not working for me either. I have a DJI Spark, latest firmware (01.00.1000), downloaded and purchased the latest NLD client, activated my drone, but I can't get the NFZ patch work. When I click "Apply NFZ patch" button, it seems like the patch runs without any problem, it says "patching complete, device will reboot", it reboots, but NFZ-s are still there, even NLD client sees them, because at the "Remove NFZ" window it still shows the apply button active, and the remove button grayed out. I tried re-applying, without any success (says complete, but does nothing). I even re-flash-ed my firmware twice, still the same. I downgraded to 0900, reflashed it two times, still not working. I've tried it on two different laptops, not working. Basically this is the only thing I bought it for, so if this can't be sorted out in a few days, I'm requesting a refund.
0
4 months ago
#1350 Цитировать
Vincent wrote:
Just a heads up that this does not work for the Mavic Zoom.

After patching everything on the NLD client UI looks good and asks you to reboot the bird. After rebooting the controller's screen shows "IN NFZ".  

Also, Im using 4.1.22 of the GO APP downloaded from this website's guide section.


The "NFZ Limit" is normal until you get GPS mode, then it should go away.  Do you see the white leds flash upon boot up?  That is how you know the patch has been applied.

There are hard coded areas that cannot be removed by the patch....yet.  We have a solution and are testing in house before release.
0
4 months ago
#1352 Цитировать
If you are applying the NFZ patch or the FCC patch and it stalls and then fails, and you get the message to restart...you need to check your network settings.  Make sure you are running NLD as administrator, and allowing NLD through any firewall and antivirus programs.  Check Windows defender also.  Then try again.  You need a good connection to our servers for these patches to fully get to your bird.
0
4 months ago
#1381 Цитировать
My Mavic 2 Pro is working fine.I downgraded twice the fw as says in the how to use PDF and patched the no NFZ.   Always turn on the RC and then the bird, also connect to the dji go 4 after the led flash. The message that I am in NFZ is shown but I can fly free...also tried It in a red zone (a low flight) works perfect!
0