Non ci sono articoli nel tuo carrello
lunedì 25 marzo 2019 22:53:33

Gimbal Issue

one month ago
#511 Cita
Hello everyone,, just asking a couple of questions after a failed landing. I was landing just after sunset and thought there was enough light to catch my drone as the landing technique. My mavic air couldn’t properly see the hand and proceeded down to movieseriesworld.com/ the ground, hitting my hand in the process www.movieseriesworld.com/forums/index.php and then falling around 1m-1.5m to the ground. After my first inspection, there were a couple of broken propellers, a few body scratches and a scratch on the outside of the gimbal. After changing the propellers, I want for a test flight to check everything, I had to recalibrate the compass and notice that my camera feed was not parallel to the horizon. I now have the gimbal ‘rolled’ to -1.9 to have it parallel. I also had to recalibrate the compass 2 times out of my next 3 flights.

0
one month ago
#590 Cita
It is most likely the ribbon cable. Do a youtube search on replacing the ribbon cable. You can pick up the cable on ebay, cheap as beans.

-Bill
0