购物车中没有商品

NLD MOD Client 1.9.2.0

2019年5月23日

Fixed FCC Mode is now fully supported on latest firmwares as well.

Supported firmwares:
01.00.0200
01.00.0300
01.00.0400

写下您的评论
评论
2019/5/23 16:53
Jesse

Awesome!

2019/5/24 1:50
new

FCC Mode here I come thanks

2019/5/24 2:29
You guys are awesome!!!!

Now you guys made it! This is what I was waiting for! I love you! Add altitude hack to go above 500 meters on 01.00.0400 and we got it. Then you gonna get shit loads of customers. That’s all. Forget everything else, we only need altitude hack and we are good.

2019/5/24 7:42
Thank you!

For easy reading:
- thank you for your input and your time
- money you get is really hard made money
- since DJI is bad with drone at first releases users like me waiting for implementing altitude removal and NFZ removal in FW 300 or 400 and after we will not sell our Mavics 2 ever
- sorry to tell you that but I ope you understand, I will buy it when NFZ will be avaliable for FW 300 or newer.
- we all admire your work and your work to give us all feedom like we all deserve

But dark days will come and DJI will implement AIRsense to their drones, if you will hack that I am willing to pay 300 € per drone. We want freedom like free people we are not in a prison. For people with bad attentions will do the other way and not with a consumer drone.

Thank you ALL at NLD!!! You are our last hope to be free!!!

2019/5/24 12:14
NFZ removal

Any roadmap for NFZ removal?

2019/5/25 1:12
FCC Mod not working on Mavic Pro fw 01.04.0300

The FCC Mod isn't working on Mavic Pro fw 01.04.0300. NLD Client 1.9.1 says 'not compatible'. Sent a request but no answer from the team at all.
Very disappointing.

2019/5/25 1:32
M2z

FCC mode working for me on .0400 firmware, just what I've been waiting for, no more dicking around with fake gps on the smart controller and covering up the drone to block out gps signals, thanks guys

2019/5/25 8:20
Mavic Pro 1 - FCC fix for 01.00.0700

When will this be available?

2019/5/26 13:30
Mavic 2 / FCC mode fix

First time I tried it failed but then I rebooted the drone and reloaded the mod client and FCC fix applied fine to latest 01.00.0400 firmware!
Tested it and flew to same place yesterday where signal problems hit around 2km and went readily to 3km without problem!
Expensive but relative to the drone cost and added utility this provides.... thanks!

2019/5/29 0:57
Mav 2 FCC didnt work

just bought and applied but didnt seem to have worked. Flew in my normal test area and exact same range as CE.
Have I done something wrong?
registered, plug drone in, activate, hit fcc button, it does its thing and says appied and all looks good.
Reboot drone and head out. No change. I am using a smart controller.
Sorry for long post but forums have disappeared.

2019/6/1 12:45
Mavic 2 zoom

Hi guys,
NFZ worked fine :) (At list on 1st test).

Please pLeAse pLEASE  ... Alt limit ....
That would be awesome

TNX

2019/6/2 14:10
Yes

Exactly what I was waiting for my M2P. FCC working great.

Thanks

2019/6/2 19:10
Good

Perfect

2019/6/3 8:13
install

i can`t Connect my DJI mavic pro With the USB and the NLD Mode Client. What i ned tho do?  
somwhere knows this problem

2019/6/3 13:13
NFZ Remove

I have question, when do you add remove NFZ on firmware 01.00.0400?

2019/6/4 6:59
Firmware downgrade

Hi iv got mavic pro firmware 01.04.0500 your app wont let me down grade app iv put my number in to activate it but doesn't work

2019/6/4 7:34
back in the air! with NFZ

When I first tried this mod on the last firmware release 1.9.1...due to whatever issues dji was having..it bricked my bird..

I contacted DJI and told them i was having firmware issues and they sent me another bird.

NLD answered my tech support email and let me know they would reset my license once i got my new bird...which they did..

tried mod again on 1.9.2 and everything worked perfect! Thanks!!

2019/6/8 3:54
firmware

what can we do
our firmware is 01.00.0000

2019/6/8 9:46
FCC works perfect!

I took my M2P to first flight after I bought a license to NLD, and this works so good. Excelent job guys. You are the best!! With FCC , there is a perfect reception!!

2019/6/9 2:29
Superb job...

Well done chaps.

2019/6/11 11:45
Tom

Great ....just need signal bost and nfz for mavic 2 pro and all is done .

2019/6/11 18:47
for mavic2

when will NLD add remove NFZ on firmware 01.00.0400?

2019/6/12 4:37
nld does not work

hello my friend
when I click or right click  to run as administrator on NLD Icon in windows 10 nothing happen.whats wrong with it?

2019/6/18 18:32
Perfect ...after drivers were loaded onto windows

Could not get NLD MOD Client 1.9.2.0 to communicate with drone.. Loaded DJI Assistant Software where drivers were loaded.. then NLD MOD Client 1.9.2.0 was able to recognize Mavic Pro..
Ripped out the latest firmware and removed the NFZ.. software kinda got hung up at 64% but waited.. then shut down software and drone and rebooted.. Its had completed  the load just didnt update 64% ..



Working like a champ ! Great fix
Awesome..

Can we do our other machine with same s/w code?

2019/6/19 9:40
Non FCC mode

Purchased for my M2P, mainly for FCC mode. Worked really easily, question is, how do you return to non FCC mode?
Same question when selecting Normal+ and Sport+ modes, how do you revert these?

发布记录
NLD MOD Client 1.9.2.5 2019年6月19日
Free firmware flashing for all!
Flash own firmware file
Fixed M2 Enterprise bugs
NLD 赏金项目
NLD Bounty Program
Participate in the BOUNTY HUNT as a donor or bounty hunter!
Root the M2 so that files in the operating system are modifyable without being rolled back. MAVIC 2 Root
CLAIMED
Obtain root on the latest MAVIC AIR firmware MAVIC AIR Root
$1,244 / $3K
Donated ~ 2 hours ago
Make anti-rollback possible from V01.00.0400 MAVIC AIR Anti-Rollback
$580 / $2K
Donated ~ 4 months ago
Neustes vom Blog
NLD MOD Client ver. 1.9.2.5 has been released!
We have made firmware flashing free and fixed support for the M2 Enterprise....
用户评价
NLD Affiliate Program
There’s no substitute to a proper review from existing users.
NLD 联盟项目
NLD Affiliate Program

推广获得佣金,帮助我们社区的发展。双赢!

Slack交流
Join us in the commnity on Slack

加入讨论与开发者直接交流,与DJI破解项目的开拓者们畅谈

SAR OPs
FREE license keys for SAR OPs Wednesday, September 12, 2018
Typhoon Mangkut and Hurricane Florence is sadly still on track and they are threatening to unleash pounding surf, days of torrential rain and severe flooding...